Cut Carbon H-Bars are not currently available, but they will be in the future, so if you're interested just put your email address in the "notify me" box, and you will be notified when we have them back in stock.
All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). The entire front loop has a 22.2mm diameter.
The Carbon 710mm Cut H-Bar weighs less than 263g (this is 215g less than the (477g) aluminum version). It passes the same strict EN/EU mountain bike standards as the aluminum and titanium bars. It is identical to our existing Cut H-bars — all the same natural hand positions, control and comfort, but 54% lighter!!
The cross bar on the Loop H-Bar sweeps forward to allow the levers to go behind the cross bar instead of in front. This gives longer uninterrupted hand positions and will allow trigger and grip/twist shifters to fit on the rearward extensions (unlike the original H-bar). The continuous front loop of the bar enhances stiffness and is good for additional aero hand positions and mounting lights, GPS devices etc. This bar provides comfort and power with an impressive weight. With the levers in the optimum position the rider is superbly placed for fast riding while still enjoying all the hand positions available. The rearward extensions allow extra leverage and a wider hand position - be it for comfort or power. All H-bars are for a 31.8 stem and the cross tube is now tapered and butted with a 31.8 mm clamp area. The grip tubes on the aluminum version are also butted for strength and weight savings.
Click here to see our blog post of the Press Release for the Carbon H-Bar.
For setup tips, check out the H-Bar Manual!