H-Bar® Jones Loop Aluminum 710

(88 reviews) Write a Review
Calculated at Checkout

The Loop Aluminium 710mm H-Bar is our most popular H-Bar.  If you're new to the H-Bar, this is the model that we tend to recommend first because its loop design has the widest range of hand positions, its aluminium construction gives the best value, and its 710mm width not only gives you the full range of positions, but allows you to cut it down to the original 660mm width (using the laser-etched cut guides) if you decide that you want something narrower. 

The cross bar on the Loop H-Bar sweeps forward to allow the levers to go behind the cross bar instead of in front. This gives longer uninterrupted hand positions and will allow trigger and grip/twist shifters to fit on the rearward extensions (unlike the original H-bar). The continuous front loop of the bar enhances stiffness and is good for additional aero hand positions and mounting lights, GPS devices etc. This bar provides comfort and power with an impressive weight. With the levers in the optimum position you get a wide range of hand and body positions, from fully upright at the ends of the grips, to a tucked aero position when resting your forearms across the crossbar and loop.  In between these extremes, there are many unique and useful positions, making this a true multi-position bar because you'll actually find yourself using all of the positions! The rearward extensions allow extra leverage and a wider hand position - be it for comfort or power. All H-bars are for a 31.8 stem and the crossbar is now tapered and butted with a 31.8 mm clamp area. The grip tubes on the aluminum version are also butted for strength and weight savings.  All H-Bars have a standard 22.2mm diameter grip area.

Try wrapping the crossbar with bartape!  You can wrap both the crossbar and loop (but it helps to leave a gap in the center of the loop to mount whatever gadgets you have), if you want to have the most hand positions!

A common question about the Loop H-bars is whether they work with barend shifters.  The short answer is yes, but we don't like to put them in the ends of the bars for a couple of reasons: especially on the wider 710 H-bars, putting the shifters in the ends of the bars it puts them in a position where they are likely to hit parked cars or trees, as well as moving them farther from the other controls and the main hand positions.  Finally, the grips would need to be modified significantly to accept the cable housing, or the bars would need to be wrapped with bartape, which won't give you quite as much padding as the ESI grips that we have made for the bars.  When we use barend shifters, we mount them on the Paul Thumbies, which have hinged clamps that allow you to mount the shifters in front of the crossbar.  They work great!

525 grams


Available in Black or Silver:

Black Loop H-Bars are bead-blasted and then black anodized for a slightly matte, lightly-textured black finish.

Silver Loop H-Bars are bead-blasted and then clear anodized for a slightly matte, lightly-textured silver finish.  Silver H-Bars are not polished.  

Great for; Mountain bikes and road bikes, Fat Bikes, Touring, Bikepacking Adventures, Singlespeeds, City Riding and more!
Compatible with; Trigger shifters, Gripshift, Shimano twist shifters, Rohloff, (hinged) thumb-shifters and Singlespeeds.
For setup tips, check out the H-Bar Manual!

Videos Hide Videos Show Videos

88 Reviews Hide Reviews Show Reviews

  • 5
    Jones H-BAR

    Posted by Bob Cotton on 24th Sep 2018

    Solid, sturdy, and light even in aluminum. Have not completely explored all the position that these bars can offer.

  • 5
    H bars

    Posted by Clay on 12th Sep 2018

    Very nice everything I heard about the h bars is true

  • 5
    H bar

    Posted by Richard on 16th Aug 2018

    Jones h bar is awesome the best of the best..ty

  • 4
    Hbars-710 aluminum

    Posted by Danimal on 25th Jul 2018

    These bars are waaaaay comfy. Excited to put them to the test on the GDMBR this summer.

  • 5
    Nice bit of kit

    Posted by Todd on 25th Jul 2018

    I have one of the 1st gen titanium H-bars on my singlespeed, and wanted something similar for my fat bike. I've logged 65 miles on this bar in the last week and it's nice to be able to stretch out and change hand positions. I have the Kraton grips, which are nice and plush, but have yet to tape other areas of the bar. I think I'll tape up a < > pattern above the brake levers for some long ride options. Still out on the relative merits of Al vs Ti, but I think my Ti bar is less "hammery" ? Any way, Jeff makes awesome stuff. Get some.

  • 5
    Best bar!

    Posted by Kay on 10th Jul 2018

    It gives me 5 useful handpositions. i changed from regular flatbar. the aero position really makes me faster and lets me cruise with less effort.

    I also like that i can change positions as needed. When I go slow i sit more upright and as i get faster i move forward through all the positions.

    the brakes and shifters are easy to reach from most positions, which makes them more useful in traffic.

    I wasn't really happy with my flatbar and even considered installing drops. Good i found the jones bar, which saved me the cost of converting to drops and gives me many more positions.

    The design and quality are really great.

  • 5
    H bar

    Posted by Kenny on 2nd Jul 2018

    Awesome handle bars. I put them on my full suspension mountian bike and they work great.

  • 5
    Jones Loop Aluminum 710

    Posted by Tai Tran on 7th May 2018

    Amazingly built and thought through design. Haven't had the chance to test the handle bar on longer rides, but so far throughout the city, it has been most enjoyable.

  • 5
    Jones Loop Aluminum 710

    Posted by Eric on 19th Apr 2018

    Took my bike out last night in 33 degree rain. Needless to say the weather was terrible, but my new handlebars made the ride enjoyable. I came home and told my wife she needs to get some loop bars for her bike. I highly recommend the Jones Loop 710s and Kraton H-Grips.