Jones EVA H-Grips

(15 reviews) Write a Review
Calculated at Checkout

The Jones H-Grips are made of EVA foam, they are very light. They are available in lengths to fit each of the two widths of H-Bars perfectly.  The H-Grips for 710mm H-Bars are 205mm long, and the H-Grips for 660mm H-Bars are 165mm long.  The grips can be used, and will work fine with the bar plugs that come in the H-Bars, but we wanted to include larger, more protective bar plugs with our grips, so that your grips won't get torn up as easily, and that's what these grips come with.  

Jeff also made sure the details are just so: the ends of the grips are beveled to meet the angle of the bar plug, so that the plug can protect the end of the grip better, which is really important when you're laying the bike down on its side.  The bar plugs themselves have a captured nut in the wedge so that when you loosen the bolt to remove the grips, the nut stays in place and the plug comes right out!  And now both the nut and the bolt that threads into it are stainless steel to resist rust!  The longest versions (for 710mm H-Bars) of the grips with their bar plugs weigh about 2.4 oz (60 grams), making them the lightest grips available for the Jones H-Bars and a great option for anyone who's looking to shave some weigh without sacrificing comfort!

Jones H-Grip expanding plugs included!

Grips are sold as pairs.

Installation Instructions: Remove old bar plugs before installation…

1. EVA Foam: clean handlebar first using alcohol.  Use a high-quality spray adhesive* such as 3M Super 77 to keep the grips locked on in all conditions.  Spray enough inside the grip and on the handlebar to lubricate them, then quickly slide the grip onto the bar, scooping out excess from the inside of the grip, and in between the grip and controls as the grip nears the correct position.  
*Adhesive can be used on aluminum, carbon and titanium H-Bars when installing the EVA Foam grips.

Note: You only have about 15 seconds to work with the adhesive -- Have everything ready!

2. Insert the expanding bar plugs fully into the end of the bar and tighten to supplied stainless steel bolts using a #2 Phillips screwdriver until the plugs stay in place when you try to move them.

Get the grips installed by a qualified mechanic if you don’t feel comfortable doing it yourself.

!WARNING: Always ride your bike with appropriate bar plugs installed.  In the event of a crash, an open handlebar can result in serious injury.  Before every ride always try twisting the grips to make sure they are tight.  Do not ride your bike if the grips are loose because doing so can result in serious injury or even death.  


Videos Hide Videos Show Videos

15 Reviews Hide Reviews Show Reviews

  • 5

    Posted by Jake on 6th Apr 2017


  • 4
    Nice Grip and improved end cap

    Posted by Patrick Martin on 13th Feb 2017

    At first I was worried these would not be soft enough but after a 100+ miles I have grown used to them. Easy to install (I didn't glue them and no problem so far) and super grippy, they seem to work well in all conditions.

  • 4
    Most comfortable bars!

    Posted by Ron on 7th Dec 2016

    Love the bars. I ride moderate single track in the mountains of NH. These bars and grips have made it more comfortable and more fun for me at my tender age of 70. The 50 Durometer grips are a must with the bars.

  • 5
    Nice Grips

    Posted by David H on 8th Oct 2016

    I went with the 50 durometer (softer) grips.
    My last ride was on a primitive trail and the grips helped absorb the rough terrain.
    The plugs are well done also.

  • 5
    Very Nice!

    Posted by Jeff on 15th Apr 2016

    The most grip for your $$. Plenty of room for different hand positions.

  • 5
    The perfect grip for the H-Bar

    Posted by Smithhammer on 5th Jan 2016

    I was a little dubious of how firm these grips are out of the box, esp. compared to the ESIs I've been running. But after installing them and riding a little bit, they're perfect.