We are currently out of stock of the Jones Titanium Plus SWB Spaceframe and Truss fork.
If you would like to be notified when they are back in stock please put your email address in the notification box on this product page. You will receive an automated email when they are back in stock. Currently we are not accepting pre-orders or back orders.
We estimate the Jones Titanium Plus SWB Spaceframe and Truss fork will be back in stock Spring 2022. (This information updated on October 31,2021)
Prices are subject to change.
Frame and fork are designed to work together – the much celebrated Jones Geometry. It's a bike without mechanical suspension. It's a "rigid" bike that isn't. It is not designed to run with a suspension fork and it does not need one.
The eccentric bottom bracket (EBB) allows you to adjust chain tension for single speeds and gear hubs, or to change your bottom bracket height to suit your preference for differing terrain or wheel sizes.
This frameset is all about function.
The 3D Spaceframe design was inspired by and born of riding on the tight, technical trails in the woods here in Southern Oregon, and each step in its development has been a functional refinement, so while some might speculate that the frame is supposed to look interesting, Jeff's only aim with the Spaceframe has always been to make a better bicycle. The frame's upper tubes are long, thin, braced, and curved in just the right way to allow them to flex and keep the bike vertically compliant; the downtube, chainstays and seat tube are oversized to keep the bike torsionally stiff. The low-slung top tube arrangement keeps the bike out of your way in technical terrain, so you can focus on riding.
• Ample chainring / stay clearance for up to a 38 tooth boost chainring
• Seatpost size is 27.2 mm (a set back post is recommended for the SWB)
• 31.8 mm / 32 mm seatpost clamp size diameter
• Standard 1-1/8" headtube for external bearing headsets such as the Jones H-Set
• Jones replaceable derailleur hanger
Jones Titanium Truss fork:
• Fork length: 435 mm
• 55 mm offset / rake
Frame: Titanium Plus SWB Spaceframe, EBB (eccentric bottom bracket), stainless steel bolts and nuts, rear thru axle / TA bolt, stainless steel water bottle bolts with integrated washers, cable guide clips, and standard Jones derailleur hanger with stainless steel bolts
Fork: Jones Titanium Truss fork with aluminum steerer tube, stainless steel clamp bolts, cable guide clips and front and thru axle / TA bolt
Fork: Jones Plus SWB steel Unicrown Fork with stainless steel water bottle bolts, cable guide clips and front and thru axle / TA bolt
Titanium Plus SWB frame and fork weights including frame parts; EBB axles bolts etc:
SWB Spaceframe sizing
Medium: Rider height: 5'6" - 6'2", Standover at center of top tube is 27"
Large: Rider height: 6' - 6'6", Standover at center of top tube is 28"
Medium: Rider height: 5'7" - 6'2", Standover at center of top tube is 30.5"
Large: Rider height: 6' - 6'5", Standover at center of top tube is 32"
All sizes of the Jones Plus SWB frames have a 69° head tube angle and a 72° effective seat tube angle
Spare derailleur hanger